abec 7 bearings
The Alex Burston comes with GC FLT 2 frames a new Jug liner with increase padding in the cuff and tongue, his own signature wheel from BHC and ABEC 7 bearings. The baseless boot design provides a super close contact to the ground and is much more responsive than traditional skates. The replaceable backslide plate is perfectly grooved and aligned with the groove of the frame.
Bam Wrecking Ball Bearings ABEC 7 Well, I bought it before 2 Wochen.Sie are ok …. Do they sound speed to that of several other camps. (Example: Bones Reds) WD40 I was them, they quickly slowed down for 10 minutes then. I really do not know warum.Meine screws are loose. But the wheel is still about an inch or postpone Sun I may anziehen.Ich in the spacers. any help? WD40 why not? Umm, and I can never undo the damage of the WD40? What “covers the” how and I take them off Best Answer.
ouch WD40 should not be placed on them ! Just skate as fast as they most likely will break Nizza.Du got dirt. Remove the lid and take a look. Clean them schön.Sie want to screw so that the wheels a little loose, so that the wheel must move a small space! Hope that did not help .. I missed? Yes WD40 is made to the dirt a little more to join and leichterdie coverage surrounding the small ball bearings, take that on a roll a little cleaner in there and turn the camp. Looking to find on the internet about the cleanliness of the camp, I’m sure it’s better than I can for the moment
High temperature thickeners thickening synthetic oil, and add the additive of the multi-effect is a long-term normal operation in high temperature environment to maintain high quality grease.An extreme high temperature tolerance and high-speed shear capacity, to cope easily with high temperature and high-speed environment.
applies to the requirement to reduce the noise or the use of the environment is very bad mechanical use, but also for the high temperature parts of the lubrication.the organizational structure of smooth, delicate fiber, high cleanliness, and inhibit the abnormal sound of the turntable bearing during operation, meet long-term operational requirements of the DN value in the more than 500,000 high-speed bearings.